Address: Long Xi Industrial Zone, Yuhuan District, Taizhou City, Zhejiang Province, China
FAX : +86-576-87491228
F1"*F1" brass stop valve The opening height of 1 inch brass stop valve is small in the process of opening and closing, and it is easy to adjust the flow rate.
1. Simple structure, convenient maintenance.
2. Effective work and quickly opening and closing.
3. Good sealing, small friction between sealing surface and long term life.
4. The structural forms of 1 inch brass stop valve body are straightly through. Straight through is the most common structure.
5. In the process of opening and closing, the friction of the sealing surface is smaller than that of the gate valve and it is wear-resistant.
Mould Number: LQ-3013
The installation and maintenance of brass stop valve:
1. Brass stop valves operated by hand wheel and handle can be installed at any position of the pipe.
2. Handwheel, handle and micromotor are not allowed to be hoisted.
3. The flow direction of the medium should be consistent with the arrow direction shown in the valve body.
How to operate the brass stop valve？
heat expansion,If it must be opened at this point, loosen the cover thread by half a turn to eliminate the stress on the stem to eliminate stem stress,and then plate the handwheel.
Welcome to buy our 1 inch brass stop valve. We are one of the leading China manufacturers and suppliers in this field. We will offer you the best quality and durable products made in China as well as the customized service. For more information, contact our factory now.